| Hz or 2 kHz) |
| A/D sampling |
100 times/s |
| CHECK |
Approx. 0.3 mV/V (Setting with the interval of about 0.1 mV/V is available in the range fromapprox.0.1 mV/V to 1.5 mV/V.) |
| Load display |
7 segment red LED with 17 mm character’s height |
| Display range |
-99 999 ~ 99 999 |
| Display times |
4 times/s (Changeable to 20 times/s, 50 times/s or 100 times/s) |
| External control function |
ZERO, PEAK/TRACK/A/Z, HOLD, RESET/A/Z OFF, SEL1, SEL2 |
| Comparator function |
|
| Set value |
-99 999 ~ 99 999 |
| Set quantity |
3 points of S0, S1 and S2
*"S0" is set by function command. |
| Comparator conversion rate |
Changeable to 4 times/s, 20 times/s, 50 times/s or 100 times/s (Syncronous with display times)
*During the display of set value, process of measurement and also process of comparator are interrupted. |
| Various functions |
Zero tracking, Degital filter, Stabilization filter, Change of HOLD target, Sheet key lock, Selection of Peak mode, Chenge of analog output target. |
| Operating temp. /humidity range |
Temperature -10 ℃ ~ 50 ℃,
Humidity 85 %RH or less(Non condensing) |
| Power supply voltage |
AC100 V ~ AC240 V 50/60 Hz
(permissible variable range from AC85 V to AC264 V) |
| Power consumption |
Approx. 9 VA (without options, at AC100 V)
Approx.18 VA at maximum (with options, at AC100 V ~ 240 V) |
| Outline dimensions |
(W)96 mm x (H)96 mm x (D)129.5 mm (excludes protruding parts) |
| Weight |
Approx. 500 g (without options) |
| Protection code |
IP65 (Only for the fron panel when the attached panel mounting gascket is installed. |